G(S)-2150 American-style forged D-type shackle

Dimensions	Nominal size （in.）	Workload limits （t）	Dimensions of each part （mm）
			A	B	C	D	E	F	G	H	N
	3/16	0.33	9.65	6.35	22.4	4.83	15.24	14.2	37.3	24.9	4.83
	1/4	0.5	12	8	28	6.35	19.8	15.5	46.7	32.5	6.35
	5/16	0.75	13	10	31	7.87	21.3	19.1	53.1	37.3	7.87
	3/8	1	17	11	37	9.65	26.2	23.1	63.2	45.2	9.65
	7/16	1.5	19	13	43	11.2	29.5	26.9	73.9	51.6	11.2
	1/2	2	21	16.0	48	12.7	33.3	30.2	83.3	58.7	12.7
	5/8	3.25	27	20	60	16.0	42.9	38.1	106	74.7	17.5
	3/4	4.75	32	23	71	19.1	50.8	46.0	126	88.9	20.6
	7/8	6.5	37	26	84	22.4	57.9	53.1	148	102	24.6
	1	8.5	43	29	95	25.4	68.3	60.5	167	119	26.9
	1-1/8	9.5	46.0	32	108.0	28.7	73.9	68.3	190	131	31.8
	1-1/4	12	52	36	119	32.8	82.6	76.2	210	146	35.8
	1-3/8	13.5	57	39	133	36.1	92.2	84.1	233	162	38.1
	1-1/2	17	60	42	146	38.9	98.6	92.2	254	175	41.1
	1-3/4	25	73	52	178	46.7	127	106	313	224	57.2
	2	35	83	58	197	52.8	146	122	347	258	61.0
	2-1/2	55	105	71	267	68.8	184	145	455	324	79.5

1.Instructions for use

1. When using lifting rings, the maximum permissible angle is 120°, see Figure 1 below.

2. Bolts or metal bars are prohibited from being used in place of pins.

3. The shackle body should not be subjected to lateral bending moment; that is, the load-bearing capacity should be within the plane of the shackle body. See Figure 3.

4. Please use correctly; overloading is strictly prohibited.

5. When shackles are used in conjunction with wire rope slings as binding rigging, the binding method should be as shown in Figure 2.

2. Scrapping Standards

1. Shackles and pins should be scrapped if they show rust or wear exceeding 10% of their nominal dimensions.

2. Shackles should be scrapped if any part shows visible cracks, fissures, or defects detected by flaw detection.

3. Shackles should be scrapped if they are visibly deformed and the pins cannot rotate.

Product Showcase

Processing

semi-finished products

Product Packaging

Product Packaging