GN OCEAN ENGINEERING EQUIPMENT(GROUP) CO. LTD

公司彩色logo
Obter um Orçamento

Cabo de Aço

categorias

Produtos Em Destaque

Wire Rope Sling
Estropo de Cabo de Aço Pressionado
Spliced steel wire rope sling
Estropo de cabo de aço com emenda
Grommet Sling
Estilingue com ilhó
Cast Steel Wire Rope Slings
Estropos de cabo de aço fundido
18*k7 Anti-rotation Compacted-strand Steel Wire Rope
Cabo de aço 8X61M
G(s)-2130 Bow Shackle
Grilhão em Forma de Arco G(S)-2130

Blog

Fabricante de Cordas de Aço com Qualidade Certificada e Fornecimento Flexível

A GN fornece cordas de aço de alto desempenho para elevação, içamento, sistemas de elevadores, engenharia offshore, reboque, construção naval e aplicações industriais pesadas. Nossas cordas de aço estão disponíveis em acabamentos galvanizado e brilhante, com núcleos IWRC ou de fibra e graus de resistência até 2160 MPa. A GN oferece soluções confiáveis de cordas de aço tanto para requisitos padrão quanto para projetos de engenharia personalizados.

 

  • Quantidade Mínima de Pedido a partir de 1 tonelada para especificações comuns
  • Diâmetros, construções e graus de resistência disponíveis
  • Normas: EN / ASTM / API / GOST / GB
  • Certificações: ABS, DNV, CCS, LR, BV
  • Aplicações: guindastes, elevadores, elevação offshore, reboque e fixação de cargas
18*k7 Anti-rotation Compacted-strand Steel Wire Rope

Cabo de aço 8X61M

Round-strand point-contact wire rope: In this type of rope, all wires within a strand—with the exception of the centre wire—have the same diameter. The lay lengths of adjacent layers differ, and the wires in adjacent layers within the strand make contact only at specific points; this type of rope is also known as a non-parallel-lay wire rope. The wires within the strand are arranged concentrically, with a difference of six wires between adjacent layers. These ropes offer good flexibility and are predominantly used for small diameters (under 10 mm) and large diameters (over 60 mm), as well as in applications such as lifting and lashing where ease of handling is a consideration.
consulta
Detalhe
webp 9

Round-strand wire rope

Wire ropes in which adjacent layers of wires within a strand are in line contact are also known as parallel-lay wire ropes. The strands are formed by twisting wires of various specifications; the pitch of the wires in each layer is the same, but the lay angle varies. Depending on the arrangement of the wires within the strand, line-contact wire ropes are classified into four types: Walentin, Sill, filled, and Walentin-Sill. In line-contact wire ropes, not only do the wires within the same layer make line contact, but adjacent wires also make line contact; furthermore, the wires in each layer of the strand have the same lay direction (see Wire Rope Laying Methods) and pitch.
consulta
Detalhe
image 3

18*K7 anti-rotation compacted-strand steel wire rope

Compared to standard wire ropes, those made from compacted strands offer a higher breaking strength; the compacted strands ensure better contact between the rope and the pulley; furthermore, the large metal surface area of the outer wires makes compacted strands more resistant to wear and corrosion. When steel wire ropes are used on multi-layer winding drums, the smooth surface of compacted strands ensures that adjacent strands do not cause scratches or damage to the rope through mutual friction; this characteristic makes face-contact (compacted strand) steel wire ropes more suitable for multi-layer winding applications.
consulta
Detalhe
6-strand Compacted Steel Wire Rope

Steel wire ropes for lifts and hoisting machinery

Wire ropes in which adjacent layers of wires within a strand are in line contact are also known as parallel-lay wire ropes. The strands are formed by twisting wires of various specifications; the pitch of the wires in each layer is the same, but the lay angle varies. Depending on the arrangement of the wires within the strand, line-contact wire ropes are classified into four types: Walentin, Sill, filled, and Walentin-Sill. In line-contact wire ropes, not only do the wires within the same layer make line contact, but adjacent wires also make line contact; furthermore, the wires in each layer of the strand have the same lay direction (see Wire Rope Laying Methods) and pitch.
consulta
Detalhe
18*k7 Anti-rotation Compacted-strand Steel Wire Rope

Steel cables for cable cars

Wire ropes in which adjacent layers of wires within a strand are in line contact are also known as parallel-lay wire ropes. The strands are formed by twisting wires of various specifications; the pitch of the wires in each layer is the same, but the lay angle varies. Depending on the arrangement of the wires within the strand, line-contact wire ropes are classified into four types: Walentin, Sill, filled, and Walentin-Sill. In line-contact wire ropes, not only do the wires within the same layer make line contact, but adjacent wires also make line contact; furthermore, the wires in each layer of the strand have the same lay direction (see Wire Rope Laying Methods) and pitch.
consulta
Detalhe
WechatIMG349

Cabo de aço 6X61

Round-strand point-contact wire rope: In this type of rope, all wires within a strand—with the exception of the centre wire—have the same diameter. The lay lengths of adjacent layers differ, and the wires in adjacent layers within the strand make contact only at specific points; this type of rope is also known as a non-parallel-lay wire rope. The wires within the strand are arranged concentrically, with a difference of six wires between adjacent layers. These ropes offer good flexibility and are predominantly used for small diameters (under 10 mm) and large diameters (over 60 mm), as well as in applications such as lifting and lashing where ease of handling is a consideration.
consulta
Detalhe
6-strand Compacted Steel Wire Rope

cordas de arame com 8 fios

Cabo de aço de fios redondos com contacto pontual: Neste tipo de cabo, todos os fios dentro de um cordão — com exceção do fio central — têm o mesmo diâmetro. Os comprimentos de torção das camadas adjacentes diferem, e os fios nas camadas adjacentes dentro do cordão estabelecem contacto pontual entre si; este tipo de cabo é também conhecido como cabo de aço de torção não paralela. Os fios dentro do cordão estão dispostos concentricamente, com uma diferença de seis fios entre camadas adjacentes. Estas cabos oferecem boa flexibilidade e são predominantemente utilizadas para diâmetros pequenos (inferiores a 10 mm) e diâmetros grandes (superiores a 60 mm), bem como em aplicações como elevação e amarração, onde a facilidade de manuseamento é um fator a ter em conta.
consulta
Detalhe
image 5

6×24 MFC-FC wire rope

Round-strand point-contact wire rope: In this type of rope, all wires within a strand—with the exception of the centre wire—have the same diameter. The lay lengths of adjacent layers differ, and the wires in adjacent layers within the strand make contact only at specific points; this type of rope is also known as a non-parallel-lay wire rope. The wires within the strand are arranged concentrically, with a difference of six wires between adjacent layers. These ropes offer good flexibility and are predominantly used for small diameters (under 10 mm) and large diameters (over 60 mm), as well as in applications such as lifting and lashing where ease of handling is a consideration.
consulta
Detalhe
WechatIMG352

Cordas de arame com 6 fios

Round-strand point-contact wire rope: In this type of rope, all wires within a strand—with the exception of the centre wire—have the same diameter. The lay lengths of adjacent layers differ, and the wires in adjacent layers within the strand make contact only at specific points; this type of rope is also known as a non-parallel-lay wire rope. The wires within the strand are arranged concentrically, with a difference of six wires between adjacent layers. These ropes offer good flexibility and are predominantly used for small diameters (under 10 mm) and large diameters (over 60 mm), as well as in applications such as lifting and lashing where ease of handling is a consideration.
consulta
Detalhe
image 4

Compacted-core plastic-coated steel wire rope

Em comparação com os cabos de aço convencionais, os fabricados com cordões compactados oferecem uma maior resistência à ruptura; os cordões compactados garantem um melhor contacto entre o cabo e a roldana; além disso, a grande área de superfície metálica dos fios exteriores torna os cordões compactados mais resistentes ao desgaste e à corrosão. Quando os cabos de aço são utilizados em tambores de enrolamento multicamadas, a superfície lisa dos fios compactados garante que os fios adjacentes não causem riscos ou danos ao cabo devido ao atrito mútuo. Esta característica torna os cabos de aço de contacto frontal (fios compactados) mais adequados para aplicações de enrolamento multicamadas.
consulta
Detalhe
Ampla Gama de Produtos para Diferentes Aplicações

Oferecemos cabos de aço para uma variedade de indústrias e condições operacionais, incluindo cabos para guindastes, cabos para elevadores, cabos de amarração, cabos de reboque e cabos para fixação de cargas. Os produtos estão disponíveis com acabamento galvanizado ou brilhante, com opções de núcleo de aço IWRC e núcleo de fibra FC.

Especificações Personalizadas para Atender às Necessidades do Projeto

Os cabos de aço podem ser fornecidos conforme diferentes classes de resistência, incluindo 1770 MPa, 1870 MPa, 1960 MPa e 2160 MPa. Fabricamos segundo as normas EN, ASTM, API, GOST e GB, garantindo compatibilidade com requisitos regionais e da indústria.

Qualidade Confiável e Suporte com Certificações

Todos os produtos passam por rigorosas inspeções de qualidade ao longo de toda a produção. Certificações de terceiros, como ABS, DNV, CCS, LR e BV, podem ser fornecidas mediante solicitação para apoiar projetos marítimos, offshore e industriais.

Aplicações

Adequado para plataformas offshore, engenharia marítima, guindastes, elevadores, construção naval, equipamentos de mineração, operações de reboque e projetos de elevação pesada.

Diga-me o que você precisa